24x100x8mm Bridge Glazing Packers

24x100x8mm Bridge Glazing Packers are designed for installers who need a 24mm bridge packer with a lower 5mm packer height.

This BP24B option is useful where a 24mm-wide bridge support is required, but the installation does not need the taller 10mm height of the BP24A version. It provides a raised surface for flat glazing packers while allowing space beneath the support point, helping the rebate continue to manage drainage and ventilation as intended.

The 100mm length gives a practical bearing area under the glass support point, while the 24mm width makes this packer suitable for many systems where 24mm flat glazing packers are being used. The 8mm bridge profile helps form a stable support shape within the rebate.

Made from polypropylene, these bridge packers are firm, moisture-resistant, and suitable for trade glazing installations across windows, doors, conservatories, and curtain walling.

Why installers choose 24x100x8mm Bridge Glazing Packers:

• 24mm width for use with matching flat glazing packer setups
• 5mm thickness for moderate raised support
• Lower-height alternative to 10mm BP24A bridge packers
• Helps keep the flat packer off the base of the rebate
• Supports insulated glass units while preserving space below the packer
• Suitable for uPVC, aluminium, and timber glazing applications
• Polypropylene construction for reliable trade use

These BP24B bridge packers are a practical choice when the job calls for a 24mm bridge packer with a standard 5mm lift rather than a deeper 10mm build-up.

What the 5mm Thickness is Used For

5mm – Standard Raised Support for 24mm Systems

Used where a moderate lift is required beneath the flat glazing packer.

Best for:

• 24mm glazing packer setups
• Creating a raised setting point inside the rebate
• Supporting sealed units in drained glazing systems
• Installations that do not require a 10mm bridge packer
• Window, door, conservatory, and curtain walling glazing work