26x100mm Bridge Glazing Packers

26x100mm Bridge Glazing Packers are used to raise the glazing support point inside the frame rebate, helping installers position insulated glass units correctly without placing the support directly on the bottom of the rebate.

The 26mm width gives a broader support area than smaller 20mm, 22mm, or 24mm bridge packers, making these packers useful for glazing systems where a wider flat packer or wider unit support is preferred.

Each packer has a 100mm length and a 7mm bridge profile, with different underside clearances depending on the thickness selected. This allows installers to choose the right option based on the rebate depth, drainage layout, and amount of height build-up required.

The 3mm and 4mm options are suitable for lower-profile support, while the 10mm option is useful where the glass unit needs to be raised more significantly.

Why installers choose 26x100mm Bridge Glazing Packers:

• 26mm width for wider glazing support
• Helps create a raised setting point inside the frame rebate
• Useful beneath flat glazing packers and sealed units
• Helps avoid blocking drainage space at the bottom of the rebate
• Available in low-profile and deeper support options
• Suitable for window, door, conservatory, and curtain walling work

These BP26 bridge glazing packers are a strong option where the installation needs a wider bridge packer with flexible height choices, from light rebate clearance to deeper glass positioning.

Material Note

The 3mm and 4mm thicknesses are made from polystyrene.

The 10mm thickness is made from polypropylene.

What Each Thickness is Used For

3mm – Low-Level Bridge Packing

Used where only a small amount of raised support is needed.

Best for:

• Shallow rebate clearance
• Lower-height glazing support
• Light packing beneath flat packers
• Installations where the glass only needs a small lift

4mm – Mid-Level Rebate Support

Used when the rebate needs a slightly higher support point without moving to a deep 10mm packer.

Best for:

• Everyday bridge packing work
• Moderate glass height adjustment
• Supporting flat packers in wider rebates
• Maintaining clearance below the packing point

10mm – Deep Support & Larger Height Build-Up

Used where the glazing unit needs a larger lift inside the rebate.

Best for:

• Deeper glazing rebates
• Larger height corrections
• Raising sealed units to the correct position
• Installations where 3mm or 4mm bridge packers are too low