26x80mm Wedge Glazing Packers

26x80mm Wedge Glazing Packers are tapered glazing packers designed for installers who need a wider wedge with plenty of adjustment options.

With a 26mm width and 80mm length, these WP26A wedge packers provide a useful balance between support area and ease of handling. They are wider than 24mm wedge packers, giving a broader contact point inside suitable glazing channels, while the 80mm length keeps them manageable for on-site fitting and adjustment.

The wide taper range makes this product especially versatile. Installers can choose from light 1-3mm wedging through to stronger 6-8mm gap take-up, depending on the amount of movement, clearance, or tightening required around the glazed unit.

These wedges are useful when fitting or adjusting windows, doors, opening sashes, and glazed panels where the unit needs to sit securely and operate correctly after installation.

Made from polypropylene, these packers offer firm, moisture-resistant support for professional glazing work.

Why installers choose 26x80mm Wedge Glazing Packers:

• 26mm width for a broader wedge contact area
• 80mm length offers a practical balance of reach and control
• Wide taper range for fine, standard, and firmer adjustment
• Helps tighten glazed units inside the sash or frame
• Useful for toe-and-heel work and sash alignment
• Helps reduce unwanted movement after the glass is positioned
• Polypropylene construction for durable trade use

These 26x80mm wedge glazing packers are a strong all-round option where installers need a wider wedge with multiple taper choices for different glazing gaps and adjustment requirements.

What Each Taper is Used For

1-3mm – Fine Adjustment & Light Stabilising

Used where the gap is small and only a gentle wedge action is needed.

Best for:

• Fine sash correction
• Small glazing gaps
• Light movement reduction
• Final positioning before beading
• Minor toe-and-heel adjustment

2-4mm – Controlled Light Wedging

Used when the unit needs slightly more hold than a 1-3mm taper provides.

Best for:

• Small-to-moderate gap take-up
• Light unit tightening
• Fine glass alignment
• Reducing minor movement inside the frame
• General glazing adjustment where only modest pressure is required

3-5mm – Everyday Glazing Adjustment

A practical middle taper for common installation and correction work.

Best for:

• Standard unit stabilisation
• Routine sash and door adjustment
• General toe-and-heel work
• Taking up typical glazing gaps
• Supporting units after initial positioning

4-6mm – Firmer Unit Tightening

Used where a stronger wedge action is needed to hold the glass more securely.

Best for:

• More noticeable glazing gaps
• Firmer sash alignment
• Door glazing adjustment
• Reducing movement in opening sashes
• Installations where 3-5mm is not enough

5-7mm – Stronger Gap Take-Up

Used where the unit needs extra wedging pressure or where the gap is larger.

Best for:

• Larger adjustment points
• Heavier sash or door correction
• Stronger unit stabilisation
• More positive toe-and-heel support
• Installations requiring a firmer final hold

6-8mm – Heavy Wedging & Maximum Hold

The deepest taper option in this range, used for larger gaps and stronger adjustment.

Best for:

• Larger glazing gaps
• Heavy-duty unit stabilisation
• Strong movement control
• Raising or tightening units more significantly
• Applications where lower taper options are too small