34x80mm Wedge Glazing Packers

34x80mm Wedge Glazing Packers are wide tapered packers designed for glazing installations where the glass unit needs a broader contact point during adjustment.

The 34mm width makes these wedges suitable for wider glazing channels and larger glazed sections where a narrower wedge may not give enough bearing area. The 80mm length provides a practical working size for on-site fitting, giving installers enough contact along the unit without making the wedge difficult to place.

As the wedge is inserted, the tapered profile helps take up space between the glazed unit and frame or sash. This can improve unit stability, reduce movement, and help the sash or door sit more correctly before the final beads are fitted.

These WP34 wedges are available in four taper ranges, giving installers useful options for fine adjustment, everyday wedging, and firmer gap take-up.

Why installers choose 34x80mm Wedge Glazing Packers:

• 34mm width for wide glazing channels and larger unit support
• Broad contact surface for improved unit stability
• 80mm length for practical fitting and controlled adjustment
• Useful for sash alignment, door adjustment, and toe-and-heel work
• Helps reduce unwanted glass movement inside the frame
• Polypropylene construction for firm, moisture-resistant support

These 34x80mm wedge glazing packers are a useful choice when installers need a wide wedge with several taper options for controlled adjustment in larger glazing channels.

What Each Taper is Used For

1-3mm – Fine Finishing Correction

Used when only a small amount of wedge pressure is needed.

Best for:

• Final glass positioning
• Light sash correction
• Small gaps in wide glazing channels
• Minor movement reduction
• Fine toe-and-heel adjustment

2-4mm – Light-to-Standard Unit Tightening

Used where the unit needs a little more hold without using a deeper wedge.

Best for:

• Small-to-medium gap take-up
• General glazing adjustment
• Reducing slight play around the unit
• Window and door sash alignment
• Controlled tightening before beading

3-5mm – Everyday Wide-Channel Adjustment

A practical taper for standard glazing corrections in wider channels.

Best for:

• Routine unit stabilisation
• Standard toe-and-heel work
• Door and sash adjustment
• Taking up common glazing gaps
• Supporting units after initial packing

4-6mm – Firmer Wedging for Larger Gaps

Used where the gap is more noticeable and the glass unit needs stronger tightening.

Best for:

• Firmer unit stabilisation
• Larger local gap correction
• Heavier sash or door adjustment
• Reducing movement in wider glazing systems
• Installations where 3-5mm is not enough