35x80mm Wedge Glazing Packers
35x80mm wedge glazing packers for wide glazing channels where a stronger tapered packer is needed to secure the unit. These WP35 polypropylene wedges are suitable for medium and heavy adjustment work, helping installers tighten glass units, reduce movement, and improve sash or door alignment.
Product Overview
35x80mm Wedge Glazing Packers are wide tapered glazing packers designed for installations where a broad wedge and firmer adjustment are required.
With a 35mm width, these packers provide a large contact face inside suitable glazing channels. This makes them useful for wider sealed units, larger frame systems, and applications where a narrower wedge may not provide enough grip or bearing area.
Unlike some wedge packers that include very fine taper options, the WP35 range is focused on medium-to-strong adjustment. The 3-5mm taper is useful for general tightening and positioning, while the 6-8mm taper is better suited to larger gaps or situations where a more positive wedging action is needed.
Made from polypropylene, these packers are rigid, moisture-resistant, and suitable for professional glazing work across windows, doors, sashes, and larger glazed sections.
Why installers choose 35x80mm Wedge Glazing Packers:
- Wide 35mm profile for larger glazing channels
- Suitable where a broader wedge contact area is preferred
- Useful for medium and stronger adjustment work
- Helps tighten sealed units inside the sash or frame
- Helps reduce movement before final beading
- Suitable for sash alignment, door adjustment, and toe-and-heel work
These 35x80mm wedge glazing packers are a good choice when the installation needs a wide, firm wedge rather than a fine adjustment packer.
What Each Taper is Used For
3-5mm – Medium Wedging & General Adjustment
Used for everyday glazing correction where a standard wedge action is required.
Best for:
- General sealed unit tightening
- Medium gap take-up
- Sash and door alignment
- Standard toe-and-heel adjustment
- Reducing movement in wider glazing channels
6-8mm – Stronger Wedging & Larger Gap Take-Up
Used where the gap is larger or the glazed unit needs a firmer hold.
Best for:
- Heavier unit stabilisation
- Larger glazing gaps
- Stronger sash or door correction
- More positive toe-and-heel support
- Installations where a 3-5mm taper is not enough
Technical Specifications
| Product Code | Type WP35 |
|---|---|
| Dimensions | L x W = 80 x 35 mm |
| Taper Range | 3-5, 6-8 mm |
| Material | Polypropylene |
▶ 🧾 Need Help?
For trade advice or assistance choosing the right packer thickness, contact us at support@glazingpacker.co.uk
