36x80mm Wedge Glazing Packers

36x80mm Wedge Glazing Packers are wide tapered packers designed for glazing systems where a large contact face is required inside the sash or frame.

With a 36mm width, these wedges are suitable for wider glazing channels and larger glazed units where smaller wedges may not provide the preferred bearing area. The 80mm length makes them practical to position on site while still giving enough contact to apply controlled wedging pressure.

The tapered profile allows installers to gradually take up gaps around the unit. This helps reduce movement, improve sash alignment, and support toe-and-heel adjustment where the glass needs to sit securely before final beading.

Available in 1-3mm, 2-4mm, and 4-6mm taper options, the WP36 range covers fine correction through to firmer adjustment without moving into very heavy taper sizes.

Why installers choose 36x80mm Wedge Glazing Packers:

• Extra-wide 36mm profile for larger glazing channels
• Broad contact area for better unit stability
• Useful for window, door, sash, and larger glazed unit adjustment
• Helps tighten the glass unit inside the frame
• Supports toe-and-heel work and sash alignment
• Available in fine, light, and firmer taper options
• Polypropylene construction for durable trade use

These 36x80mm wedge glazing packers are a practical choice where installers need a wide wedge for controlled adjustment, but do not require the deeper 6-8mm or heavy-duty taper ranges.

What Each Taper is Used For

1-3mm – Fine Wide-Channel Adjustment

Used where the unit needs only a small amount of tightening across a wider contact area.

Best for:

• Final glass positioning
• Small gap correction
• Light sash adjustment
• Minor movement reduction
• Fine toe-and-heel work

2-4mm – Light-to-Standard Wedging

Used where a little more wedge pressure is needed while still keeping the adjustment controlled.

Best for:

• Small-to-medium glazing gaps
• General unit tightening
• Light door or sash alignment
• Reducing play inside the frame
• Controlled adjustment before beading

4-6mm – Firmer Unit Hold

Used where the unit needs stronger tightening or the gap is more noticeable.

Best for:

• Firmer sash or door correction
• Larger local gap take-up
• More positive toe-and-heel support
• Stabilising wider glazed units
• Installations where 2-4mm is not enough