75x100mm Wedge Glazing Packers

75x100mm Wedge Glazing Packers are heavy-duty tapered packers designed for larger glazing adjustment work where a standard-width wedge is not enough.

With a 75mm width and 100mm length, these WP75 wedges provide a much larger contact area than typical 20mm, 24mm, 28mm, or 32mm wedge packers. This makes them useful where the installer needs a broad wedge surface to support, tighten, or adjust a larger glazed unit or panel.

The 6-15mm taper gives a deep adjustment range, allowing the wedge to take up larger gaps and provide a stronger wedging action. This makes the product suitable for situations where smaller taper ranges are too shallow, or where a more substantial packer is needed to help position and stabilise the unit.

Made from polypropylene, these wedge packers are firm, moisture-resistant, and suitable for trade glazing work where stronger support and controlled adjustment are required.

Why installers choose 75x100mm Wedge Glazing Packers:

• Extra-wide 75mm face for large support areas
• 100mm length for strong contact along the unit
• Deep 6-15mm taper for larger adjustment requirements
• Useful where standard wedge packers are too narrow or too shallow
• Helps tighten and stabilise larger glazed units or panels
• Suitable for heavier sash, door, and glazing adjustment work
• Polypropylene construction for durable trade use

These 75x100mm wedge glazing packers are a strong choice for installers who need a larger wedge for heavier adjustment, deeper gaps, and wider support across the glazed unit.

What the 6-15mm Taper is Used For

6-15mm – Heavy-Duty Gap Take-Up & Strong Wedging

Used where the installation needs a deep taper and a broad support area.

Best for:

• Large glazing gaps
• Heavy-duty unit adjustment
• Larger glazed panels or door units
• Stronger toe-and-heel support
• Installations where standard wedge packers are not deep enough
• Wider contact support during final positioning