30x76mm Frame Packers

30x76mm Frame Packers are Type G installation packers designed to support and align window and door frames during fitting.

With a 76mm length and 30mm width, these packers provide a longer support area than smaller compact frame packers, making them useful when installers want extra bearing length around fixing points or along the side of the frame.

Their U-shaped design allows the packer to sit around the fixing, helping support the frame at the point where the fixing is tightened. This helps reduce the risk of outer frame distortion and allows the frame to be installed plumb, square, and correctly spaced.

Made from polypropylene, these packers are strong, compression-resistant, and suitable for professional installation work.

Why installers choose 30x76mm Frame Packers:

• Longer 76mm profile for extended frame support
• Useful around window and door fixing points
• Helps prevent frame distortion when fixings are tightened
• U-shaped design allows fitting around the fixing area
• Helps support the frame so it can be installed plumb and square
• Made from durable polypropylene for trade installation use

These 30x76mm frame packers are a practical choice where a standard compact packer may not provide enough length and the installer needs controlled frame support around fixing positions.

What Each Thickness is Used For

1.5mm – Fine Frame Packing & Alignment

Used when only a small amount of spacing is required behind the frame.

Best for:

• Fine alignment around fixing points
• Minor frame gap correction
• Final positioning before fixing
• Preventing small areas of frame movement

3mm – Light-to-Standard Frame Support

A useful thickness for common frame installation adjustments.

Best for:

• General window and door frame packing
• Supporting the frame around fixings
• Correcting small-to-medium gaps
• Helping keep the frame square before final tightening